5 Killer Quora Answers On Double Glazing Lock Repairs
Double Glazing Lock Repairs
Good locks on your windows and doors can stop burglars from entering your home. Generally, they don't like breaking glass or slipping through windows that are not closed.
However, some double glazing owners have had issues with their door or window lock after it's been installed. These issues can usually be resolved without the need for new double glazing.
Broken or damaged locks
If your uPVC window or door lock is damaged or broken or has a problem, a locksmith will repair it for you. They can fix hinges, striker plates and locks for double-glazing. They can also reposition the cylinder to fix any misalignment issues that could be causing your handle to not operate correctly.
The mechanism might be jammed when the key fits into the lock, but it will not turn or be difficult to insert. The dirt or grease could get stuck in the mechanism. If this is the situation, it may be possible for the lock to be cleaned and lubricated. Use a dry lubricant such as graphite or teflon, not oil, because oil can attract dirt and cause it to stick to the inside mechanism. After lubricating the lock, you need to insert the key and try to turn it. The lubricant should work its way through the mechanism and the lock should be able to turn without difficulty.
Screws that are loose within the lock mechanism are another cause of a faulty lock. They may loosen and fall out, or even break off completely, preventing the lock from being able to work properly. These screws can be tightened by using a screwdriver, but be careful not to over tighten them. This could cause damage to the internal components.
A broken lock can be dangerous for you and your family members, particularly if you have young children. It's possible for them to open the door without you knowing and thus allow them access to your home. If you're concerned about this happening, a locksmith who is vetted can provide rapid and effective service to re-secure your double glazing doors.
Misty Glaze is a professional uPVC company in Lancing that can repair all kinds of defective and broken mechanisms on both uPVC windows and doors. We can also modify your uPVC or double glazing locking system to meet your particular requirements, meaning that in a lot of cases replacement windows and doors are not required.
Handles that are damaged or broken
As part of their overall security package, many double-glazed windows come with a multipoint lock. This is an excellent option for those concerned with criminals who are looking to gain access to your home. It's also worth asking your installer about anti-lift blocks which can be put in in addition to the locks that are already in place to help keep your window firmly locked in the closed position.
It's not uncommon for the handle locks to get damaged or fail - they are the first component of your window that could be pushed open by a criminal intent on breaking in. Fortunately, the good news is that this is one of the most straightforward parts to fix.
double glazing repair near me uPVC handles as well as aluminium handles come with a multi-point locking mechanism, referred to as Espagnolette which is designed to resist forced entry. This security upgrade is often provided as an additional option on new uPVC window installation. As an upgrade option, older aluminium or uPVC handles that are no longer in use can be upgraded to a shoot bolt locking system.
It is crucial to fix the handle as soon as you can if it's damaged. The damaged handles could stop the window from closing properly and allow drafts to enter. It could also be a weakness that opportunistic thieves could take advantage of and put the belongings of your family and your own at risk.
The process of repairing the damaged mechanism begins with gaining access to the frame of the window and removing the damaged handle. The gearbox that opens the handle is then located and the model is identified, so that a replacement may be sourced which matches the profile of the internal window frame mechanisms.
Once the mechanism has been replaced, the handle can be fixed using the original screws - but we would recommend replacing them with more long screws since this will provide the most secure fit. The final step is to seal the handle using an opaque sealant. This will protect it from further deterioration. After that your window will be fully operational again, and at a fraction of the cost of replacing the entire window.
Hinges that are broken or faulty
If your windows aren't shut properly, draughts can enter your home, the security barriers will become weaker and you run an increased risk of damp or water damage. Window hinges that break or fail to function properly are a common problem and are easily fixed.
If you have a uPVC window that isn't able to open or close, it's likely your hinges are broken or damaged and require replacement. While a lot of window companies require that you purchase a new window unit to resolve this simple issue We can replace the damaged hinges and save you money.
Window hinges are often damaged by repeated use, or they are weakened over time by corrosion. If you've broken a window hinge, it's essential to take steps to avoid further damage. This includes not causing the window to close or open.
Knowing the type of hinge you have will help you locate the right parts to repair it. Maco, Mila and Roto are all window hinges. It is recommended to consult a professional in this case to ensure that you don't make the mistake of purchasing parts that aren't compatible with your current hardware and could cause further damage.
A faulty hinge is a major issue for uPVC windows and doors. They can be a major source of noise and can also allow water to infiltrate which can damage your windows.
Check whether the pin barrels on both hinge halves are aligned. If it isn't then tap the headpin using a hammer in order to create a slight bend in the hinge barrel. This will help keep the pin in the right position. Ask a second person to hold the door as you take the hinges and hinge screws from both the doorjamb as well as the door. Replace the hinges using those of a matching size and attach the screws using glue. Finally put the hinges in place using weights or clamps while the glue is drying.
After your hinges have been repaired after which you will be able to re-install the door and attach the handle. It is a good idea to replace the screws using the same length of wood dowels as the original screw so that they align with each the other.
Broken or Faulty Glass
uPVC Windows can become damaged in time, despite the fact they are extremely effective in keeping out the cold and conserving the heat. This can include broken or damaged glass, as well as faulty locks. This is an issue that can be costly should it be not addressed. It can also affect the aesthetics of your house and could lead to a loss of insulation, so it is essential to fix any damage as quickly as you can.
You can repair your cracked glass by yourself if your have the appropriate tools and techniques. First, make sure the area around the glass is clear so that any shards won't cause injury to anyone or are a trip hazard. Then, you must remove any broken pieces and dispose of them in a safe manner. Then, apply masking tape over the entire area to stop fragments from bouncing around and sticking to your skin when you move them. If you're dealing with a double-pane window, it's a good idea to fit the glass pane before glueing it back in place so that you are sure you'll have enough space complete the project.
Before applying the glue wipe the surface of the broken frame and the glass with an unclean, dry cloth. Follow the directions for application and curing times, which can vary from product to. Depending on the angle of the crack, you may want to hold the glass in place while it is curing. You can do this using lightweight clamps that are specifically designed to support fragile materials.
After the adhesive has set, carefully place the glass in the window frame. Make sure that it is flush with the frame edge and that there aren't any gaps between the glass sash and frame. Be careful to avoid flexing the window while it's installed, as this could weaken the seal and lead to water infiltration and condensation.
If you have a glass window that is completely broken or has larger cracks, call a professional glazier such as O'Brien(r) to organise an exchange. Unattended handling of broken glass can cause danger to pets and children It's therefore essential to act swiftly.